|
Welded razor barbed wire is flat, so it looks aesthetically and can be used in places where has more people. Welded razor wire mesh is a grid that has cells in the form of lozenges, made of razor barbed reinforced tape. Most welded razor barbed wire is a canvas, rolled up in rolls.
Welded razor mesh, available in a canvas 2000 mm high and has a diamond-shaped cells with a face of 242 mm, height of the diamond about 450 mm, width of the diamond 190 mm. At the vertices are connected by straps diamonds, similar bracket, used in the manufacture of concertina razor wire and flat barrier razor concertina. Its length can vary up to 50 meters, which also affects the price of the product and installation costs. As a rule, often welded razor mesh in length is from 4 to 15-meter, as this size is most convenient for the installation of barbed wire. Before installing the razor wire is necessary to prepare the frame. It is based on vertical racks made of galvanized pipes. They are connected by transverse bars, which will be attached to the upper part of the grid. Frequency setting poles shall be designed so that they could make installation of razor wire cloth desired length. The optimal distance between two adjacent columns should be no more than 2 meters. Fixing of razor barbed wire is carried to the posts and the upper cross-beams using special anchors or brackets. Mounting must be implemented so that the upper ends of the razor wire diamonds above the top crossbar and prevent the penetration of the fence. At the request of the customer welded razor fence bottom may bury in the ground to 500 mm. Razor wire is galvanized, so it does not spoil the action of moisture in the soil. After installing the razor barbed wire does not need additional treatment, as it is processed further corrosion composition at the factory.
In the production of welded razor wire barbed tape, the following materials:
Galvanized steel thickness of 0.55 - 0.58 mm;
Galvanized wire is made of high carbon steel diameter of 2.4 - 2.5 mm.
Welded razor wire mesh is framed in a welded frame of square tubes (25 mm x 25 mm, 15 mm x 15 mm).
Welded razor wire is mounted on stands made of the following materials:
Shaped tube 80 mm x 40 mm x 2.8 - 3.0 mm;
Pipe diameter of 76 mm;
Channel bars bent number 8.
The cell dimensions: height - 392 mm ±, width - 150mm ± 10.
Delivery welded razor wire mesh framed in steel profile pipes or steel angle. A single sheet is supplied in rolls 2000-4000 length of 2000 mm to 400 mm in diameter.
Welded razor wire mesh has high resistance to overcome and has an aesthetic appearance. You can use it painted in camouflage, as a low-profile barriers in the bands of alienation between the two lines of barricades.
Welded razor fence is intended to erect an effective barrier to protect the stationary type variety of civil, military and special purpose from unauthorized access.
At your request we may manufacture welded razor wire in various sizes.
|
